Application method and handling and storage of carbon dioxide cylinders
Under what conditions do you need to replace the carbon dioxide cylinder
1. When the pointer of the volume meter is less than 200 pounds, the cylinder needs to be replaced;
2. Ensure that there is a necessary gasket between the carbon dioxide bottle and the pressure reducing valve, and ensure that there is no missing gasket, otherwise carbon dioxide will leak;
3. It is necessary to fasten the gas cylinder with iron chain.
Replacement of CO2 cylinders
1. When should I check the use of gas cylinders every day?
2. Before paving
3. Before peak operation
4. At the beginning of each shift
5. When the pointer of the capacity meter is below 400PSI.
Correct handling method:
1. Keep the cylinder upright;
2. Fix the gas cylinder with iron chain or belt;
3. The storage place is well ventilated;
4. It is necessary to keep away from high temperature and sunshine when storing locally;
5. Avoid hitting the cylinder.
Incorrect handling method:
1. Horizontal cylinder;
2. Store in a room below 0 ℃ and above 52 ℃;
3. Turn over the replaced air cylinder valve to exhaust the gas in the air cylinder;
4. Hold the cylinder valve when handling.
Storage of carbon dioxide gas
1. It should be stored in a well ventilated environment;
2. The storage temperature shall not exceed 52 ℃;
3. The full cylinder and air cylinder shall be stored separately
Article source: small carbon dioxide cylinder manufacturerhttp://www.chameto.com/
12-04
Application method and handling and storage of carbon dioxide cylinders
Application method and handling and storage of carbon dioxide cylindersUnder what conditions do you need to replace the carbon dioxide cylinder1. When the pointer of the volume meter is less than 200
11-11
Manufacturer of small carbon dioxide cylinders: high-pressure gas cylinders and rules for use
High pressure gas cylinders and rules for use1、 Use of gas cylinders① The cylinder needs to be connected with the pressure regulator, and then flows out for use after depressurization. Do not directly
10-13
The Role of Nitrogen and Argon in Iron and Steel Enterprises
Due to historical reasons, the original carbon dioxide cylinder in China has been used for a long time with a pressure of 125 kg/cm2 and a filling coefficient of 0.75 kg/l. Under such service condi